Cabelcon 90-FM-FF HQ – Premium 90° F Right-Angle Adapter
A small adapter with an exceptional difference in quality.
Not enough space behind your TV, satellite receiver or multiswitch? The premium Cabelcon 90-FM-FF HQ allows you to route your coaxial cable at a 90° angle without sharply bending it directly at the connector.
The real difference is inside: This premium adapter features a continuously bent beryllium-copper inner conductor The conductor runs continuously through the 90° bend, eliminating an additional contact junction. This removes one potential cause of intermittent connections. .
In some basic right-angle adapters, additional internal contact junctions can become weak points. The Cabelcon design avoids such a junction inside the bend, providing a particularly high-quality electrical connection.
Premium connection technology with exceptionally low signal loss – for satellite installations where quality matters.
Your Benefits at a Glance
- Continuous inner conductor – no additional contact junction in the 90° bend
- Fewer potential contact problems – one possible weak point eliminated
- Beryllium copper A premium copper alloy combining good electrical conductivity with high mechanical strength. Suitable for precision electrical contacts. – high-quality contact material
- Nitin-6 coating A special metallic surface coating used by Cabelcon to protect metal surfaces against corrosion and support long-lasting connections. – corrosion-resistant surfaces
- Shielding Class A++ A particularly high level of shielding against external electromagnetic interference, helping protect signal transmission. – excellent interference protection
- Very low insertion loss Insertion loss measures the additional signal attenuation caused by the adapter. The lower the dB value, the better. – minimal additional signal loss
- Up to 3,000 MHz – suitable for satellite and broadband applications
- 90° design – ideal for tight spaces behind equipment
ⓘ Hover over or tap an information icon for a short explanation.
Why the Continuous Inner Conductor Matters
Some basic right-angle adapters use multiple interconnected contact parts inside. Poorly manufactured contact junctions can potentially cause intermittent connections.
The Cabelcon 90-FM-FF HQ instead uses a continuously bent inner conductor through the adapter.
Your benefit: No additional contact junction in the 90° bend, fewer potential contact issues and a high-quality signal path.
Technical Specifications
All important technical specifications and performance figures.
Show technical specifications
| Manufacturer | Cabelcon / Amphenol |
|---|---|
| Model | 90-FM-FF HQ |
| Design | 90° right-angle adapter |
| Connections | 1× F male / 1× F female |
| Frequency range | 0.3–3,000 MHz |
| Characteristic impedance | 75 ohms |
| Shielding class | A++ |
| Inner conductor | Continuously bent beryllium copper |
| Housing material | Brass |
| Coating | Nitin-6 |
| Suitable contact pin diameter | 0.5–1.2 mm (F female) |
| Applications | Satellite and coaxial connections |
Show shielding performance
What is shielding attenuation? It indicates how effectively the adapter protects against external interference. The higher the dB value, the better.
| Frequency range | Shielding attenuation |
|---|---|
| 30–1,000 MHz | > 105 dB |
| 1,000–2,000 MHz | > 95 dB |
| 2,000–3,000 MHz | > 85 dB |
Show insertion loss
What is insertion loss? It measures the additional signal attenuation caused by the adapter. The lower the dB value, the better. The following figures are typical manufacturer values.
| Frequency range | Typical insertion loss |
|---|---|
| 0.3–500 MHz | 0.02 dB |
| 500–1,000 MHz | 0.02 dB |
| 1,000–2,150 MHz | 0.04 dB |
| 2,150–3,000 MHz | 0.06 dB |
Ideal Applications
- Limited space behind TVs and satellite receivers
- Avoiding sharp cable bends directly at F connections
- High-quality satellite and coaxial installations
- Systems requiring excellent shielding performance
Note: This adapter has one F male and one F female connection. Please check compatibility with your equipment.
Scope of Delivery
1× Genuine Cabelcon 90-FM-FF HQ Premium 90° F Right-Angle Adapter
Manufacturer Information / Responsible Economic Operator under the EU General Product Safety Regulation (GPSR)
Amphenol Cabelcon ApS
Industriparken 10
DK-4760 Vordingborg
Denmark
Email: cccustomercare@cabelcon.com
Deutsch
Türkçe
English